PRODUCTS

LF-EUP75T-1H12V-0E1
January 4, 2017
LF-EUP75R-1H12V-0
January 4, 2017
Show all

LF-EUP15R-1W600C-0

15W 2.4G 2 Channels Remote Control LED Wireless Driver

Technical parameter

Product Name 15W 2.4G 2 Channels Remote Control LED Wireless Driver
Item LF-EUP15R-1W600C-0
Channels 2 channels
Input Voltage 100-240 VAC
Input Frequency 50/60 Hz
Input Current 0.16A@220V
Output Voltage 19 – 21VDC
Output Current Total 600mA
Output Power 15W Max.
Remote Control Distance >20 Meters
Wireless Frequency 2.4GHz ISM
LED Driver dimension 168*50*34mm
N.G. 150g
Working Temperature -20 ~ +50℃

Remote control button functions

1. Match code and grouping

The remote control can be used after the remote match the code with the led driver, the method is as following:

Choose the led driver that you want to divide the group, then turn off the power for 10 seconds, then turn on the power switch, at the same time when you turn on the power (in 3 seconds), press the button “Group ON” of the group you want, the lights connecting to the driver will flick for 3 times, then this group is set successfully. The other groups can also be set by the same method.

Remark:One led driver can only match one group of the same remote, but one remote group can match countless led drivers, and one led driver can match 10 remotes.

2. Clear the code and regroup:

if the room layout are changed, or you want to make a little adjustment upon your fond, then you may want to change the previous groups, before you change the groups, you need to clear the code, the method is as following:

Choose the led driver you want to clear the code, turn off the power for 10 seconds, then turn on the power again, at the same time when you turn on the power(in 3 seconds) of led driver, press the button “All ON” for 5 times, the lights connecting to the led driver will flick for 6 times very quickly, then the code is cleared successfully.

After the code is cleared, the method of setting the group is totally the same as the the principle of “matching the code and grouping”

3. Button Functions:

ALL ON/ALL OFF: Press the button to turn on or turn off the led driver which be matched to this remote.

Brightness+/Brightness-: Adjust the led lights brightness. Press and hold to adjust quickly.

Warm White Adjust: Adjust the Color temp. to warm white.

Cool White Adjust: Adjust the color temp. to cool white.

Group ON/Group OFF: Press the button to turn on or turn off the lights which be matched to this group.

4. Precautions:

The remote should not put in the area with large-scale metal or near strong electromagnetic wave region; otherwise the communication distance will be seriously affected.